Where standards do not meet the specified requirements, Britt will assist in the design and manufacture of all specials. Load ratings will be established to insure support integrity.
BRITT ENGINEERING, INC.
P.O.BOX 320325
BIRMINGHAM, AL 35232
PHONE: 205-951-5691
FAX: 205-951-5605
POWER INDUSTRY
BRITT manufactures the OMEGA ARM which is 100% composite construction with UV resistant exterior casing.
3-1/2 x 3-1/2 Arm can be used for DEAD END or TANGENT application with ONE STANDARD gain plate.
Uses standard bolting - NO SPECIAL washers or load plates needed.
Comes in 62, 96, 120 and 144 Heavy Duty or Standard Duty.
3000# Pin strength = Strongest in the industry.
Highest Strength to weight ratio in the industry.
HD62 Arm rated @ 27,000# (DE) & 19,000# (TG).
LD62 Arm rated @ 12,000# (DE) & 10,200# (TG).
HD96 Arm rated @ 18,000# (DE) & 14,000# (TG).
LD96 Arm rated @ 7,600# (DE) & 6,200# (TG).
Same strength at full 30O pin angle = Eliminates the need of doubling of arms for line angle change.
Bracing not required. Stock only one arm for both DE & TG applications.
Predrilled or can be field drilled (or cross drilled).
No Rot, Insect or Woodpecker problems.
Last arm you will need to buy - saving money - outlasts three wooden arms.
DESIGN &
ENGINEERING
SPECIALISTS